Teamson Kids TD-13862, Manual

Page: 20 / 20

WALL MOUNTING ASSEMBLY
G. Large Washer x 1
16 X 6 X 1mm
E. Wood Screw x 1
4X32mm
Attach Plastic strip to back of product.
Hole predrilled in product backboard #AJ.
B. Small Washer x 2
Electric Drill
1/4"(6.5mm) Drill Bit
Phillips Screwdriver
1/4’’(6.5mm)
Hole in wall.
C
A
D
G
E
The following tools (not included)
are required for assembly:
For added safety and stability, it is recommended that the wall mounting hardware
be installed.
For safe mounting, it is essential to use well anchors appropriate to your wall type
(i.e. plaster, drywall, concrete, etc.). Mount to wood studs whenever possible.
Use a 1/4"(6.5mm) drill bit to pilot the hole. If mounting to plaster, wood panels,
brick or other drywall please consult a qualified professional.
Please make sure you use the right hardware for your wall type for your safety.
Do not install on a wall where items
can fall off and injure a child.
CHOKING HAZARD, Unassembled parts
may be choking hazard to children 3 years
and younger.
Adult assembly required.
Hardware contains small screws with sharp points.
Keep unassembled parts out of reach of small children.
A. Screw x 1
M4x16mm
C. Plastic Anchor x 1
D. Plastic Anchor x 1
Wrench x1
F. Nut x 1
WARNING:
Hardware
Step 1
Use 1/4"(6.5mm) drill bit to drill hole in wall.
Do not drill an oversized hole or the wall anchor will
not hold tightly into the wall.
Tap wall anchor into hole.
Secure product to wall with screw "E" through Plastic strap
and into wall anchor.
Warning:
Serious or fatal injuries can occur from furniture tip-over. To help prevent furniture tip-over. Use provided mounting hardware
to secure furniture to the wall. This may reduce but not eliminate the risk of furniture tip-over. Do not allow children to climb
on furniture. Keep remote controls, toys, and other items that might attract children off of this product. Unless specifically
designed to accommodate, do not set televisions or other heavy objects on top of this product.
Step 2
WARNING:
B
F
B
10X 5X1mm