Team SILK AX14-60, Instruction Manual

Page: 89 / 92

AX14-60 Flange Facing Machine
88
7. MAINTENANCE INSTRUCTIONS
7.1 Introduction
The following information sets out recommendations for the maintenance of this
equipment. Periodic maintenance, when carried out as specified, will help to prevent
premature failure of the equipment. Should a component fail or its operation become
suspect the equipment should not be used until the fault has been rectified.
7.2 Periodic maintenance
The following maintenance tasks are those required to help prevent premature failure of the
equipment. It is recommended that all the tasks should be carried out when specified.
PERIOD TASK
Daily when in use or on
completion of a job Clean the equipment.
Check that all the components are present and in
good working order.
Check all fasteners are properly tight.
Returning to storage Complete the daily tasks.
Protect all the exposed areas of the equipment from
corrosion.
Annually when in storage Un-pack the equipment and check for signs of
corrosion or other deterioration.
Check that all the components are present and in
good working order.