English
English
36
37
Embedded Message
A message, composed of a maximum of 64 symbols, can be composed and saved to
the radio. This message will be displayed if the radio data is transferred to the computer
via software.
Local Message
Information about radio version, serial number, production date, etc. are possible.
Please note that not all information will be available for all radios.
The radio has to be connected to the computer for reading the data.
RESET
To reset the radio data to the factory preset hold the PTT key (7) and the PF1 key (8)
at the same time when powering on the radio. A medium-long tone will be emitted.
Note: if you change the preset settings of the radio with the optional software T-UP32
please save your individual settings before transferring them to the radio to avoid data
loss in case of an unvoluntary reset.
CONNECTOR
The TeCom-LC has a Kennwood-compatible connection (3.5/2.5 mm - stereo /stereo)
for ear-/microphones, headsets and the USB software data transfer cable.
Accessories can be found on our web site www.team-electronic.de.
Technical data subject to change without notice.
tecom-lc_manual_4mod:Layout 1 2/16/2016 1:44 PM Page 36
