Page 3 of 19
© 2014 Team Play, Inc.
© 2014 Team Play, Inc.
Secure the Power Cord
1.
Plug the female end of the AC power cord (provided inside the Parts box) into the outlet on
the rear of the cabinet.
2.
Plug the male end of the AC power cord into a properly-‐grounded wall outlet.
3.
Zip-‐tie the power cord to the bridge lance as shown below:
4.
Move the cabinet into its final position, making sure that the ventilation ducts are not
blocked and the cables are not pinched. Make sure that the power cord is not exposed in
any way that would allow someone to trip over the cord.
5.
Adjust the lower leg levelers down, so that the cabinet is level, stable, and does not rock.
6.
Make sure that the four cabinet wheels are not touching the floor, nor supporting the
cabinet.
7.
Turn the power switch located on the rear of the cabinet to the “ON” position.
