Page 12 of 19
© 2014 Team Play, Inc.
13.
After the door is locked into place, the printer
will automatically feed four sheets of paper to
test whether the paper is installed properly.
14.
The clear cover of the shard tray has been
removed. The shards should fall out of the
printer shard tray to the floor of the printer
compartment inside of the photo booth.
Each time that you replace the paper roll,
clean up the shards from the floor of the
printer compartment.
Use of the shard tray would be likely to cause
the printer to jam and is not recommended
15.
The “READY” light will turn green on the printer
once the ink ribbon and paper have been
loaded properly.
16.
Next, load the Ink Film and Ink Tray.
