[ ] 9.
Mate the two-pin Molex® connector from the
backlight LED lamps to the connector
LCD
(main)
cabinet.
[ ] 9.
This step requires a ¼-inch socket or hand
driver. Bolt the marquee to the
roof. Use four half-inch, number 6
screws, two on each side of the marquee.
Inspect Your Work
You’ll Need These Tools
•
3/4-inch end
[ ] 1.
On the back of the LCD
The switch is on the bottom left side.
∆
WARNING
Ground connection.
The game machine requires a grounded, three
defeat the ground pin! Ungrounded operation risks electrical shocks and equipment damage.
[ ] 2.
On the back of the game cabinet, locate the game AC pow
bottom left side. (As you face the cabinet back.)
[ ] 3.
Turn on the power switch.
begin. Loading takes about
[ ] 4.
Verify that the game starts and Attract
[ ] 5.
Check the game lamps for any that
[ ] 6.
If you’re unfamiliar with the
manual. Then return to this instruction. Otherwise, enter the Main Menu.
[ ] 7.
Set pricing as you want it.
[ ] 8.
Set the volume control for the desired sound level.
(Pod). Inside the upper coin door panel, the control
[ ] 9.
On the side of the volume control mount is a slider. This slider controls woofer (bass)
volume. Set the woofer control for the
[ ] 10.
If the sound volume isn’t loud enough for your location,
Chapter 2. Setup
2-8
pin Molex® connector from the
backlight LED lamps to the connector from the
inch socket or hand
Bolt the marquee to the LCD cabinet
inch, number 6 sheet metal
screws, two on each side of the marquee.
You’ll Need These Tools
inch end wrench
cabinet, locate the AC line cord. Plug the line cord into an AC
bottom left side. (As you face the cabinet back.)
The game machine requires a grounded, three-wire power outlet.
defeat the ground pin! Ungrounded operation risks electrical shocks and equipment damage.
On the back of the game cabinet, locate the game AC power switch. The switch is on the
(As you face the cabinet back.)
switch. After the game finishes loading, the game’s Attract Mode
. Loading takes about 30 seconds.
starts and Attract Mode runs.
Check the game lamps for any that don’t light.
re unfamiliar with the game machine’s adjustment system, read
manual. Then return to this instruction. Otherwise, enter the Main Menu.
Set pricing as you want it. (Use these menu settings: Coin 1, Coin 2, and Price Per Play.)
control for the desired sound level. This control is inside the CPU cabinet
Inside the upper coin door panel, the control mounts to the right
On the side of the volume control mount is a slider. This slider controls woofer (bass)
volume. Set the woofer control for the desired sound level.
If the sound volume isn’t loud enough for your location, go to the Sound Volume Menu.
Plug the line cord into an AC outlet.
wire power outlet.
Never
defeat the ground pin! Ungrounded operation risks electrical shocks and equipment damage.
er switch. The switch is on the
he game’s Attract Mode should
’s adjustment system, read
Chapter 3
of this
manual. Then return to this instruction. Otherwise, enter the Main Menu.
these menu settings: Coin 1, Coin 2, and Price Per Play.)
nside the CPU cabinet
to the right cabinet wall.
On the side of the volume control mount is a slider. This slider controls woofer (bass)
Sound Volume Menu.
Page 10 of 12
Copyright 2015 Team Play, Inc.
