146
58
21
BAG G (Continued)
2 6
Figure 54
Table 53B
!
Step 9. Use Tables 53A and 53B to determine how the servo
mounting posts (146) should be attached to the servo
(not included).
!
Trim any flashing from the pins on the mounting posts
so that they will seat all the way into the holes in the chassis
brace and chassis.
!
Step 10. Place a #4 washer (58) over each of the four
4-40 x 3/8" button-head screws (21) and attach the servo posts
(146) to the servo by threading a screw (21) through the upper
and lower holes in each post (146). Do not tighten the screws (21)
yet! Just snug them up so that the posts are held in place, but can
still be moved from side to side with a little resistance. The screws
(21) will be tightened after the servo is installed so that the posts
(146) have the correct spacing.
Figure 54
21
58
Table 53A
