SPEKTRUM DX2E RADIO SYSTEM
1. Steering
Wheel
Controls direction (left/right) of the model
2. Throttle
Trigger
Controls speed and direction (forward/brake/reverse) of the model
3. Antenna
Transmits the signal to the model
4. ON/OFF Switch
Turns the power ON/OFF for the transmitter
5. Indicator Lights
-
Solid green light
—indicates adequate battery power
-
Flashing green light
—indicates the battery voltage is critically low. Replace batteries
6. ST
Trim
Adjusts the total steering travel
7. TH
Trim
Adjusts the total throttle travel
8. ST Rate
Adjusts the sensitivity of AVC
9. BIND Button
Puts the transmitter into Bind Mode
10. ST. REV
Reverses the function of the steering when the wheel is turned left or right
11. TH. REV
Reverses the function of the speed control when pulled back or pushed forward
SRS4201 AVC TECHNOLOGY RECEIVER
12. BIND
13. DISABLE
14. AUX 2
15. AUX 1
16. THR
17. STR
INSTALLING THE TRANSMITTER BATTERIES
1.
Push in the battery cover a small amount to release the retaining tab, then remove the cover.
2.
Install 4 AA batteries, taking care to align the battery polarity to the diagram in the transmitter’s
battery case.
3.
Carefully reinstall the battery cover by aligning the tabs with the slots on the transmitter.
CAUTION:
Do not remove the transmitter batteries while the model is powered
on or while operating, as a loss of model control, damage or injury can result.
For more information on the transmitter, go to www.horizonhobby.com and click
on the support tab for the Spektrum DX2E to download the instruction manual.
5
1
2
3
4
8
6
7
9
10
11
SRS4200
4CH SURFACE RECEIVER
BIND/BATT
DISABLE
DATA
AUX1
AUX2
THR
STR
13
14
15
16
17
12
5
EN
LOSI MINI 8IGHT-T RTR • INSTRUCTION MANUAL
