HOW TO OPERATE THE ROTISSERIE
Before using the appliance for the first time, clean the rotisserie assembly well. Ensure
the Mini Kitchen is off and cool, and un-plugged.
Offer the assembled rotisserie fork into the Mini Kitchen cavity; remember to ensure the
Mini Kitchen is unplugged and cold.
HELP! I THINK MY MINI KITCHEN HAS GONE WRONG!
I’VE PLUGGED MY MINI KITCHEN IN AND THE FUSE HAS BLOWN
IN THE HOUSE. IS THE MINI KITCHEN BROKEN?
The Mini Kitchen draws
2700W but on first use it may draw more before settling into steady state operation.
Ensure the power socket is suitable for this power. In older houses, or where you have a
sensitive RCD type fuse board, you may have a perennial problem with nuisance tripping.
It’s not the fault of the Mini Kitchen and not a valid reason for return. Ensure all controls
are at 0/OFF then activate one by one, as and when needed
I’VE GOT BURNT FOOD DEBRIS ON THE RACK AND/OR TRAY.
WHERE CAN I GET REPLACEMENTS?
You can contact us in the following
way where we will be pleased to help:
Call on 0121 693 9221 (1000 – 1630 hrs, Mon-Fri excl Holidays) where we can take your
order over the phone
Online at www.teamuki.com, follow the link to the Showroom, thence to Spares, thence to
Spares for Mini Kitchens, and you can buy online
Use the Order Form attached to this instruction booklet
I’VE CLEANED THE MINI KITCHEN BUT THE GLASS IS STILL NOT
AS CLEAN AS NEW. HOW DO I RESTORE IT?
Over time, cooking and food
debris will discolour the glass of the door. This is not a cause for concern or valid reason
for return. We suggest, having cleaned it with warm soapy water as described elsewhere,
to use some toothpaste on the glass. Toothpaste is mildly abrasive, so use it sparingly,
but it can be useful in cleaning glass once all else has failed. Do not let toothpaste
adhere to other parts of the Mini Kitchen, especially the inside
Assemble the rotisserie forks;
note the forks are placed with
the tightening key on either
side of the spindle.
Spear the food (typically
chicken) on the forks; tighten
the forks accordingly.
Once the sharp end is engaged, then
push inwards so the square shaped
end can be assembled in place.
Ensure the Mini Kitchen is un-plugged and
off.
When the cooking has finished, always
wear Mini Kitchen gloves when removing
the rotisserie spindle and forks.
You can use the rotisserie fork carry handle
to suspend the built-up rotisserie fork.
Now you can cook! Plug in the Mini Kitchen and switch the Rotisserie/Upper element switch
(J) to the ON position. The rotation must not be blocked, so ensure there is enough space
in the Mini Kitchen cavity for the assembled rotisserie spindle to move freely. The spindle
may rotate in steps, this is normal and not a cause for concern or return.
REMEMBER TO
SET THE TEMPERATURE BY THE OVEN CONTROL (G) AND THAT THE LOWER
ELEMENT (K) IS 0/OFF. A HAZARD MAY OCCUR IF THIS IS LEFT ON.
When you have finished cooking, set the Rotisserie switch (J) to the 0/OFF position
and reset oven temperature control to 0
