20
21
Dear customer,
The following instructions will help to prolonge your radios life.
Do not expose the transceiver for a long period to direct sunlight, nor
place the transceiver close to heating appliances.
Do not place the transceiver in excessively dusty areas, humid areas,
or on unstable surface.
If an abnormal odor or smoke is detected, immediately turn the power
off.
Do not touch the power plug with wet hands.
Do not modify this transceiver for any reason.
Refer service to qualified technician only.
CONTENTS
page
1. Unpacking and Checking Accessories
22
2. Preparation
2.1 Power Cable Connection
22
2.2 Radio Installation
22 - 23
2.3 Installation of a CB antenna
23
2.4 Aerial Connection
24
3. Getting Acquainted
3.1 Front Panel and Microphone
24
3.2 Display
25
3.3 Rear Panel
25
4. The Secondary Functions
4.1Transmission Power Selection
25
4.2 Setting Squelch Level
26
4.3 Setting Time-out-timer
26
5. Basic Operations
5.1 Turn the Power Switch ON or OFF
26
5.2 Adjusting the Volume
26
5.3 Transmitting Operation
27
5.4 Receiving Operation
27
5.5 Change Channel
27
6. Scan Options
6.1 Start Scanning
27
6.2 Priority Channel
27
6.3 End Scanning
27
6.4 Time-control
28
6.5 Carrier Wave Control
28
6.6 Calling Back
28
7. Other Operations
7.1 Time-Out-Timer(TOT)
28 - 29
7.2 Busy Channel Lockout(BCL)
29
7.3 Monitor
29
7.4 Clear Tail Tone
29
7.5 CTCSS/DCS
29
7.6 DTMF
29 - 30
7.7 2-Tone Signaling
30
7.8 5-Tone Signaling
30 - 31
7.9 Talk Around
31
7.10 Reverse Frequency
31
7.11 Auto Channel Selection (ACS)
31
7.12 Repeater Signals
32
8. Self-programming Mode
32
8.1 Select Channel
32 - 33
8.2 Set Operating Frequency
33
8.3 Set CTCSS/DCS Encode and Decode
33
8.4 Set the Channel Spacing
33 -
8.5 Transmission Prohibited on Busy Channel
8.6 Add or Delete Channel in the Scan List
8.7 Add or Delete Compander
8.8 Set Priority Channel
9. Trouble Shooting
10. Specification
11. Frequency Table
GB
GB
The use of commercial frequencies requires a licence and
charges apply.
We recommend you to get your radio programmed by an aut-
horized TEAM dealer only. The programming has to follow the
regulations and rules in general and the restrictions of the
licence.
manual.qxp 14.07.2006 16:08 Seite 21
