30
31
To open the menu
channel settings
, press the key
【
MENU
】
(5) shortly. The symbol
F
(1) appears in the upper left
corner of the LCD. Press the channel selector [
PUSH
] (14) to open the menu.
To open the menu
general settings
, press the key
【
MENU
】
(5) approximately 2 seconds.
Once the menu is activated, use the rotary channel selector (14) to select a function. To edit the setting for the selected
function, press the channel selector [
PUSH
] (14). Make your selection by turning the rotary channel selector and press it to
confirm your selection. To exit the menu press any key.
[SCAN]
channel scanning
1. Start channel scanning by pressing the key
【
SCAN
】
(6). The symbol
SC
(4), located in the lower left corner, starts blinking.
2. Change the direction of the scanning (Up / Down) by turning the rotary channel selector.
3. To stop the channel scanning press the key
【
SCAN
】
(6) again.
add to/delete from scan list
In channel mode, only the channels of the scan list will be scanned. Channels that are added to the scan list can be re-
cognized by the letter
SC
(4) in the lower, left corner. To add a channel to the scan list (or delete it), hold the key
【
SCAN
】
(6) for approximately 2 seconds. The scan list can also be edited via the menu
channel settings
.
[DW]
Dual-Watch On/Off
Pressing shortly the key
【
DW
】
(7),
will activate the dual watch function. Once activated, the symbol
DW
(10) appears.
Setup Dual Watch function
1. Select the first channel for the dual watch function.
2. Hold the key
【
DW
】
(10) for appr. 2 seconds until the symbol
DW
starts blinking.
3. Now, set the second channel for the dual watch function and press again the key
【
DW
】
(10) for confirmation.
[EMG]
priority channels 9/19
and
key lock
priority channel 9/19: The tri-state key
【
EMG
】
(15) switches from priority channel 9 to priority channel 19 and then back to
regular mode. The priority channels 9 and 19 are indicated by the symbol
EMG
(15).
key lock:
To activate the key lock function, which deactivates all keys except for the PTT key, hold the key
【
EMG
】
(15)
for approximately 2 seconds until the key symbol (17) appears.
MENU CHANNEL SETTINGS
1. To open the menu channel settings, first, press the key
【
MENU
】
(5) shortly (the symbol
F
(1) will appear) and then,
press the channel selector
【
PUSH
】
(14).
2. Make your selection by turning the rotary channel selector (14).
3. Press the channel selector
【
PUSH
】
(14) to access the available settings.
4. Now, make your selection by turning the rotary channel selector (14) and confirm your selection by pressing the
channel selector
【
PUSH
】
(14).
5. To exit the menu, press the key
【
MENU
】
(5) or any other key.
No.
Function
LCD Symbol
settings and description
1 BUSY
transmission blockage on occupied channels; ON/OFF
2
REP
direction of TX REP frequency shift
OFF
: no shift
REP+
: shift to top
REP-
: shift to bottom
8
SCAN
SC
edit scan list; symbol
SC
(14)
ADD / DEL
4
Public Data
PD
general settings; ON / OFF; activates / deactivates
Menu Channel settings in active state, these functions
are not available: HICUT, NB, ECHO, 10KHZ and
ROGER
5 HI-CUT
HIC
receiving tone type; ON / OFF
6 NB
NB
Noise Blanker; ON / OFF
7 ECHO
ECHO
Echo; ON / OFF
HAM_MobileCom-1011_small-Dim:Layout 1 9/10/2014 12:39 PM Seite 30