4. Press and hold the WiFi Button for 3 seconds until you hear a beep and the WiFi
indicator begins to blink rapidly.
5. Log in the home page of the Smart App, tap “+” in the top right corner of the screen.
Note:
• Ensure the WiFi and Bluetooth of your mobile device are enabled.
• Ensure that the signal of the network environment where the device is located is
strong and stable.
6. Select the Auto Scan tab. It will automatically detect the Air Fryer and then tap next.
7. Select the same WiFi network of your mobile device and enter the password and tap
next.
8. The Smart Sous Vide Stick and the app will now begin the pairing process.
9. After successfully configuring the device, tap done to finish the pairing.
Pair with “Add Manually”
Alternatively, the Smart Sous Vide Stick can be paired using the Add Manually option on
the app. Tap the “+” button on the top right corner and select the Add Manually tab. Find
and select the Sous Vide Stick and then follow the instructions on the screen.
Note:
• Always select 2.4GHz WiFi network when there is an option.
• The default pairing setting is EZ mode. Under EZ mode, long press again the WiFi
button for 3 seconds can switch to AP mode and the WiFi indicator will begin to blink
slowly. For AP mode paring, please follow the instructions on your mobile device
screen.
6.2 Heating up
Important: Your sous vide stick required a 4.25” (11cm) deep heat-proof pot or container
with a minimum capacity 2.64 gallons (10 liters) to work effectively. The unit will not function
unless there is sufficient water present to immerse the min level indicator located on the
stainless steel sleeve. It is important to ensure the sous vide stick is perpendicular to the
water level in order to properly circulate the water bath.
1. Install the adjustable clamp on the side of your pot or container, then clamp it firmly
in place.
2. Insert the sous vide stick into the clamp.
3. Fill the pot with water to some level between the MIN and MAX lines marked on the
side of the stainless steel sleeve.
4. Plug the sous vide stick in a nearby AC power outlet. Ensure that the pot is not on a
10
