9
BASIC CAR SETTINGS
SUSPENSION TRAVEL
RIDE HEIGHT
• Place the chassis on a block in order to release the suspension to the maximum.
• Measure the distance between the 2 fixing points of the shock absorber.
• If necessary adjust the FR & RE suspension travel by screwing the set screw on the FR & RE lower suspension arm.
FOR BUMPY GROUND
FOR FLAT GROUND / ROAD
FRONT
REAR
115mm
130mm
• Lift the car by ±30cm and drop the car on the floor.
• The front and rear suspension arms should be ± parallel to the ground. (Neutral setup)
• Adjust the tension of the shock absorber spring according to the type of terrain.
It is important to properly adjust the travel of the suspension arm to prevent the shock absorber from reaching the end of its travel
and damaging it.
To achieve the correct ground clearance setting, follow the instructions below.
Release the
suspension
Release the
suspension
30cm
Summary of Contents for KRONOS XTR 6S
Page 30: ...30 NOTE ...
Page 31: ...31 NOTE ...