Connection to a WiFi hotspot
Once your WiFI module is initiated, you can now connect to an external hotspot. The easiest way is to
connect it by the
Web-ui
:
●
Connect the TRACER TX to your radio and power it up
●
On your PC or phone search for a new WiFi network like “TBS_XF_AP_xxxxxx”
●
Connect your pc/ phone with this network. On Windows machines this can take up to one minute
●
Open your browser and enter ip in the address bar: 192.168.4.1
●
Open the
WiFI tab
●
Click on Scan to search for available WiFi hotspot/ networks
●
Click on the name of the found network you want to connect to - the name will be entered for you
●
Enter your password and hit Connect/ Disconnect
●
When you refresh the WebUi page after a few seconds, you will see the IP address assigned by the
WiFi network for TRACER TX
Note: if WIFi hotspot/ network has no internet connection, cloud based features will not work.
Agent X/ M/ L menu work as well:
●
Connect the TRACER TX to your radio and power it up
●
Navigate in the TRACER menu to
WiFI/ General
●
Hit
Scan to search for available networks
●
Under
SSID you can select the found network
●
Enter password for the selected WiFI hotspot/ network in
Password option
●
Select
Connect to start the manual connection to the selected WiFI hotspot/ network
●
Done
Firmware upgrade
Download the Agent X installer from
team-blacksheep.com/products/prod:agentx
(Windows7/8/10 and
macOS) - no drivers needed to use the application, but an Internet connection is required to download the
latest firmware versions.
Make sure you use the Agent X version 2.0.33 or later.
Detailed information on how to use the Agent X can be found
.
A video series on how to upgrade your radio can be found
.
44
Summary of Contents for TBS MAMBO Radio
Page 41: ...41...
