23
BODY MOUNTING
Trim and paint the body. (See painting
instructions on page 25 if you have not done
this before.)
Secure the #6142 body to the chassis with
two #6332 body clips where shown.
REMOVE THESE
PARTS FOR:
Basic & Sport:
Step 5
WING ASSEMBLY
Trim and paint the #6182 wing. Make two
holes for the wing things.
Insert the #6190 wing things. Insert the
#9454 wire through the wing things.
Secure the wire to the wing things with the
#4436 set screws.
Push wires through holes of rear shock tower
where shown.
6190, qty 2
wing thing
9454, qty 1
.065" wing wire
6182, qty 1
wing
4436, qty 2
4-40 x 5/16
Follow trim lines carefully.
These openings allow
for shocks
1:1
6190
6190
6182
9454
4436
4436
6332, qty 2
body clip
T O O L S U S E D
s t e p 5
B A G H
.050"
use inner holes
cut 6 openings
for body
these openings allow
for shocks
air scoop
body mount
body & wing
mounts
antenna
6142, qty 1
body
B A S I C & S P O R T K I T S O N L Y
REMOVE THESE
PARTS FOR:
Team & F.T.:
Step 5
6193B, qty 2
wing thing
9454, qty 1
.065" wing wire
6154, qty 1
wing
4436, qty 2
4-40 x 5/16
1:1
6332, qty 2
body clip
T O O L S U S E D
B A G H
.050"
6154, qty 1
body
T E A M & F A C T O R Y T E A M K I T S O N L Y
BODY MOUNTING
Trim and paint the body. (See painting
instructions on page 25 if you have not done
this before.)
Secure the front of the #6154 body to the
chassis with one #6332 body clip where
shown.
WING ASSEMBLY
Trim and paint the #6154 wing. Make one hole for
the body mount.
Insert the #6193B wing things as shown in above
illustration. Insert the #9454 wire through the wing
things.
Secure the wire to the wing things with the #4436 set
screws.
Push wires through holes on rear shock tower and
add a body clip where shown.
s t e p 5
