Free Standing
This unit has been designed to be used only in an upright position on a firm, flat
level surface.
The unit can safely be used both indoors and outdoors.
Position your WashStand Xtra so that you can gain access to the TEALtainer water
container on the left side of the unit before filling or emptying.
Failure to follow these instructions may result in personal injury, damage to the
product or damage to property.
Do not overtighten fixings as this may damage the unit.
Check that the unit is upright and level before filling with clean fresh water.
Waste Water
All WashStand Xtra models come complete with a TEALtainer water container: the
waste water is contained within a heavy duty polyethylene bag - when the fresh
water is used up, the waste bag will be full.
There is no need for a separate waste pipe or waste water storage container.
Do not re-use waste water.
FAILURE TO FOLLOW THESE INSTRUCTIONS MAY INVALIDATE YOUR WARRANTY.
Installation
Withdraw both the clean water hose (white cap) and the dirty water hose (red
cap) and remove the TEALtainer from the unit. The TEALtainer has a carrying
handle for easy transportion to a water supply.
Make sure that the waste bag is empty.
Fill the fresh water bag (white cap) with
clean water of the required temperature
(which should not exceed 40˚C)
to just below the filler cap.
Return the TEALtainer to the side of the WashStand Xtra and push in the fresh
water delivery pipe, making sure that the waste pipe is inserted into the red waste
cap hole.
The unit can now be positioned for use on a flat, level surface.
Use the foot pump to discharge water to wet hands.
Apply soap and wash hands thoroughly for at least 20 seconds.
Use the foot pump to discharge water to rinse hands.
Waste water will drain into the waste water container bag in the TEALtainer water
container.
To remove waste water, remove the water container and lift it out.
Tip the water from the TEALtainer water container into a foul water drain.
Rinse with clean water.
Refill the unit and with clean water of the required temperature, which should not
exceed 40˚C.
Operating instructions
Page 8
Page 9
