Installation Manual - TEAL PN 1060147 rev 2.5
24
TEAL Electronics
SMA America, LLC
5.2 Mounting the Multigate XT
a. Tools required - Philips head screwdriver to attach mounting feet to enclosure. Other
tools as needed to attach mounting feet and enclosure to wall (this can vary by
installation depending on the wall material, thickness, etc.).
b
NOTICE
All Multigate XT models are designed to be wall mounted in a vertical
position. Orientation is confirmed with the SMA Logo label in the upper right corner
when mounted as shown in Figure 18.
c. The wall mounting kit is included with each
Multigate XT enclosure, and includes a
package of 4 non-metallic mounting feet
brackets and 4 screws as shown in Figure 19.
d. Attach the mounting feet brackets to the back
of the Multigate XT enclosure as shown in
Figure 20.
e. XT1E mounting: Refer to Figure 22 for
mounting template for model XT1E mounting
feet locations.
f. XT2E and XT2S mounting: Refer to Figure 24
for mounting template for models XT2E and
XT2S mounting feet locations.
g. XT3S and XT4S mounting: Refer to Figure 26
for mounting template for models XT3S and
XT4S mounting feet locations.
Figure 19: Multigate XT wall mounting
kit, included with each Multigate XT.
Figure 20: Multigate XT wall mounting
kit, shown installed on Multigate XT.
Figure 18: Multigate XT wall mounted
in the vertical position, confirmed by
SMA Logo label located in upper right
corner of mounted unit.
