2
owner’s manual
20
VoiceLink
troubleshooting
System is turned
“on” but there is no
sound
System has power
but no sound
Voice is distorted
and/or signal drop-
out occurs
•
Verify AC power; the Red
LED lights when turned
“on”
•
Check if system has
been unplugged
•
Check circuit breaker
•
Call maintenance for
assistance
•
Turn “on” microphone/
transmitter
•
Check for IR transmission,
Signal presence (Orange
LED)
•
Check the Green LED in
the sensor
•
If sensor LED is not lit
•
Sensor has been
disconnected (unplug-
ged or broken cable)
•
Power output to sensor
has failed (Receiver/
amplifier needs to be
replaced)
•
Check the charge on your
batteries
•
Verify power switch in
battery compartment is in
“Hi” position (Body-Pack
transmitter)
•
Verify that the diodes
on transmitter or sensor
are not being covered
or obstruction between
transmitter and sensor
Problem
Solution
contact
If your problem persists
and this guide has not
resolved the issue, call our
customer service depart-
ment for additional assis-
tance. (800) 588-0018
