owner’s manual
18
projector system setup
•
With sensor installed, connect it to VoiceLink
Plus
•
Connect VoiceLink Plus into AC power and
locate it near projector
•
Connect an audio cable with 3.5mm connectors
from projector audio output to VoiceLink I input
(front panel)
•
Connect the speaker outputs to installed
speakers
•
Turn “on” VoiceLink Plus and Video Projector
•
Set “AUX IN” control on VoiceLink Plus to 2
o’clock position
•
With microphone turned “on”, speak and adjust
microphone volume using “MIC” volume control
on VoiceLink Plus
•
With an Auxiliary program turned “on” and
plugged into the projector, adjust the auxiliary
volume with the remote control
•
Once auxiliary volume is optimized, readjust
microphone volume using “MIC” volume control
•
System is now ready to use with remote control
of AUX inputs and consistent Mic volume
(Mic volume does not change with remote
volume control)
Microphone volume is
not affected by the remote
control of the auxiliary
inputs.
note
How to Interface VoiceLink I with a Video Projector and
incorporate the Projector’s Remote Control
VoiceLink
AUDIO OUT
REMOTE
SENSOR
AUDIO
IN 1
AUDIO
IN 2
AUDIO
IN 3
Infrared Transmitter
”Crescent”
Speaker
Speaker
Projector
Remote Control
Video Projector
POWER
INFRARED MIC
AUX IN
VoiceLink Plus
MP3 Player
Computer
DVD Player
Corner
Sensor
