You are now ready to test the system
To test the system, we are going to use a wireless body-pack transmitter
with microphone, handheld microphone and an auxiliary audio source
(DVD, CD Player, etc.)
Turn the Quantum “on”, using either large knob
•
Red LED will light to indicate power
•
Set the Ch. A and Ch. B controls to 12 0’clock
Handheld Microphone Transmitter and its Features
•
Turn “on” the microphone with slide switch and observe the Green
LED (If Red, batteries will require a charge or be replaced)
•
Observe the amber LED next to Ch. B volume control, it indicates
that an IR signal is being received from the microphone.
•
If the Ch. A LED turns “on”, unscrew the bottom half of the handheld
and slide the channel selector switch to Ch. B.
•
Speak into the microphone and adjust the volume using Ch. B
control on Quantum.
•
While talking, venture around the room, you should experience 100%
reception throughout the area.
•
Upon completion of test, put the microphone in the charger for
recharging
Check the Auxiliary Line Input
•
Connect a DVD player, computer audio output, or iPod using a 3.5
mm patch cable to the line input.
Caution: Be sure you are connecting to a line level output
•
With the quantum turned “on”, turn “on” or engage your auxiliary
source.
•
Adjust the volume on the Quantum to about mid scale and then
adjust the output (if its not a fixed line output) of the auxiliary
source.
•
Verify quality of sound and adjust to desired volume.
Line Output / Control
•
The line output delivers a composite audio signal to be fed into
another device i.e. a recorder, iPod, or the input of an assisted
listening system.
•
The adjacent knob adjusts the level of the output signal.
