background image

2

owner’s manual

2

Quantum II

product description

The Quantum II is an infrared wireless microphone 
sound system. It is the nucleus of the classroom 
sound field system which provides optimum voice 
reinforcement. 

The addition of a Quantum II sound system will 
transform your classroom into a totally hands free, 
voice re-enforcement system, resulting in reduced 
voice fatigue, enhanced student listening and 
improved student learning. The wireless function 
permits 360° connectivity throughout the classroom 
regardless of body position or orientation. 

The system is comprised of an infrared detecting 
sensor. The sensor collects the IR wireless signal 
from the microphone/transmitter and sends a 
composite signal to the mixer/amplifier. The 
receiver transforms the composite signal into an 
analog audio signal which is fed to the Quantum 
II mixer. An additional audio sources, such as; 
computer, DVD, VCR or Projector can be plugged 
in to the Quantum II. The AUX IN level  controls  the 
individual audio input. The audio will then be fed to 
the speaker in the column for voice reinforcement 
throughout the room.

On the front panel of the Quantum II, there is a 
3.5mm output jacks for interface with an assistive 
listening system (ALS) or lesson capture (LINE 
OUT). 

The microphone / transmitter can be one or two 
Sapphire Pendants or Handhelds. The rechargeable 
batteries will provide 6 – 8 hours of service per 
charge. The drop-in charger will recharge the 
batteries overnight, ready for another day’s use.

Reliable
performance.
Use with 
confidence.

Summary of Contents for IRQ-3120





















Reviews: