background image

owner’s manual

8

Quantum II

BRC-60 drop-in battery charger 

This stylish desktop drop-in charging station makes 
it convenient and easy to recharge both Sapphire 
Pendant and Handheld Microphones. Charge one 
IRH-35 handheld transmitter and up to two IRT-60 
Sapphire transmitters simultaneously. Charging 
indicator lights illuminate Red when charging, 
and Green when fully charged. The power LED 
illuminates Blue when plugged in.

The ceiling sensor is the preferred infrared sensor 
for optimum performance. This is the unit that 
needs to be installed on the ceiling. It comes with 
a mounting/support bracket and 50 feet of plenum 
rated cable with RCA connector on each end. The 
ideal location for the dome sensor would be in the 
center of the ceiling. This will provide a clear signal 
path for the IR transmission from the transmitter to 
the dome sensor without obstruction. In addition, 
you will have 360° coverage and will minimize 
the transmission distance for more reliable 
performance. It collects the infrared transmission 
signal via 6 large detecting diodes. 
The additional sensor and cable can be added 
for larger rooms or rooms with poor connectivity. 
Locate and install the sensors for optimum IR 
reception, run the cable to the sensor input on top 
of Quantum II system.

ICS-55 ceiling sensor

sensor cable

A Cable connects the sensor to the receiver. The 
cable is dual-shielded with a male RCA connector 
on each end and is plenum rated. 

Green light indicates that 
the sensor is receiving 
power from the receiver. 

power “on” LED

Summary of Contents for IRQ-3120





















Reviews: