19
Pairing a Bluetooth moble device to CPS-120 or CPR-125 Touch Panel
1.
This display means the Bluetooth device is not powered.
Press and hold "BT" source button for 3 seconds to power the Bluetooth on.
2.
This display means the touch panel is ready to pair with your Bluetooth device.
Search Bluetooth setting on your mobile device for "TeachLogic".
Each Touch Panel has a unique Serial Number on the panel display.
Look for SN:TeachLogic-00000XXX and pair that number with your device.
3.
This display indicates that your mobile device and Touch Panel are in the
pairing process.
4.
This display indicated your device and the Touch Panel are paired
5. Bluetooth will automatically power off if no signal is received after about 10 min.
6. To connect a different Bluetooth device, hold "BT" source button for 3 seconds
and all "BT" action will be stopped.
After completing this step, another moble Bluetooth device can be connected to
the TeachLogic CPS-120 or CPR-125 touch panel.
Bluetooth