9
Optional:
Two Additional Speakers
installing SP-2000 wall mount speakers
•
First observe the shape of the room: ceiling height, door
locations, windows, mounting surface, and seating area
•
Ordinary installation would be to locate the speakers
on each side wall approximately even with the front row
of listeners
•
Mount the speakers 6–7 feet above the fl oor
•
Install the mounting brackets in the vertical (up/down)
orientation
•
Mount brackets using the appropriate hardware
•
Insert speaker with the tweeter in upper position
•
Secure speaker in bracket with the hand fasteners
•
Orient each speaker toward the center of that half of the
listening area
•
Strip speaker cable ends ½” and connect to speaker
•
Observe speaker polarity: Connect (+) wire (with printed
writing) to (+) terminal and (-) wire (unprinted &
textured) to the (-) terminal
•
Route speaker cable to the receiver/amplifi er in a safe,
least visible, tidy manner
final connection of the system
With receiver/amplifi er located, speaker and sensor cables
neatly routed, we are ready to complete the installation.
•
Cut the speaker wire to the appropriate length
•
Strip about
3
/
8
” off the end of each speaker wire.
•
Twist the wire and if you have a soldering iron, tin
the wire ends
•
Unplug the phoenix connector, insert (+) wire (with
printed writing) into either outside (+) terminal. Plug
the other (-) wire into center (-).
•
Tighten set screws.
•
Repeat for other pair and insert plug fi rmly into
speaker receptacle
•
Plug power supply into AC outlet
