INSTRUCTION MANUAL
6
WIRING CONNECTIONS
NOTE:
Never connect cable to the system while it is connected to the battery power.
Whenever the unit is disconnected from the battery, the preset memory will be erased and
the unit will go back to its factory defaults.
Note: 1.
To watch video the parking wire should be connected to break signal. 2 cables is
connected to a Hands-Free device (not included).
2. The GND of parking wire is connected with brake signal, while the GND of SWC wire is
connected with steering wheel.
3. The restriction of use SWC is the voltage between the adjacent buttons are above 0.2 V
that can be identified.
Parking wire
Note:
The parking wire is connected with brake signal; for safety, the programs can be
seen on the monitor after braking the car.
