2
Thank you for purchasing the TD-700T/TD-700T(CCL)/
TD-700T(485) Digital Indicator.
Please read this document in its entirety before using the
product to get the best performance and ensure safe and
proper operation.
The TD-700T(CCL) includes the CC-Link option.
In this manual, “this unit” or “TD-700T” is used when referring to
TD-700T, TD-700T(CCL) and TD-700T(485) models.
ATTENTION
The unit display shown in this manual shows the English
interface, but this unit is set to Japanese when sent from the
factory. (See “9-7. Languages” to change to English.)
Features
o
Five-digit digital display enables direct reading of physical
quantities up to ±99999.
o
Support for TEDS sensors makes calibration easy.
Automatic calibration is also possible when a TEDS sensor
is connected.
o
An equivalent input function is included, making sensitivity
adjustment without actual loads easy.
o
Supports remote sense functions. Even using long cables
measurement is possible without losing precision.
o
S
tatic strain measurement is possible. Identifying load cell
defects and other problems through plastic deformity is
easy.
o
In addition to high and low limit comparison, this indicators
also supports high high limit and low low limit comparison
functions.
o
Supports a variety of hold functions, including peak hold,
bottom hold, peak to peak hold, peak and bottom hold,
average hold and these holds with zone designations.
o
DIN size supports incorporation with testing devices and
manufacturing equipment, for example.
o
D/A output according to designated values is a standard
feature.
o
Product is RoHS compliant
o
Optionally supports CC-Link and RS-485 interfaces for easy
connection with production lines and other systems.
o
Waveform display function allows input signals to be
checked as waveforms.
Disclaimers
Information is given about products in this manual only
for the purpose of example and does not indicate any
guarantees against infringements of third-party intellectual
property rights and other rights related to them. TEAC
Corporation will bear no responsibility for infringements on
third-party intellectual property rights or their occurrence
because of the use of these products.
Included accessories
If anything is missing or damaged, contact us. (For contact
information, see the last page.)
Micro driver (flat-blade)
1
Input and output connector plugs
B2L 3.50/08/180F SN BK BX
1
B2L 3.50/16/180F SN BK BX
1
AC adapter (GPE012T)
1
o
An AC adapter is included with the TD-700T for Japan and
North America. No adapter is included for other regions.
(The included AC adapter conforms to the safety standards
of Japan and North America.)
Panel attachment fixtures
(already attached to unit)
2
DIN rail attachment adapter
1
Power input terminal bank cover
(pre-installed on unit)
1
Instructions for Use (this document)
1
The following additional accessories are included with the
TD-700T (CCL).
KEC-NS0604-02 CC-Link connector
1
CC-Link connector cover
1
The following additional accessories are included with the
TD-700T (485).
KEC-NS0604-02 RS-485 connector
1
RS-485 connector cover
1
Ferrite core (SFT-59SNB)
1
Introduction
Company names and product names in this document are the
trademarks or registered trademarks of their respective owners.
