4
TUNER
(LINE IN)
REMOTE
CONTROL
R
L
Amplifier (A-R650)
T-R650
A
B
C
Connection
B REMOTE CONTROL jack
If you have TEAC A-R650, connect this jack to the A-R650’s
remote control jack wi†h remote control connection cord.
Convenient system control operations are available.
<
When you tune in a station, the input selector of the A-R650 is
set to “TUNER” automatically.
When you want to use the remote control functions, connect
the REMOTE CONTROL jack of each component by a remote
control connection cord.
<
You can use the remote control unit UR-431 (provided for
A-R650). Aim the remote control unit at the A-R650 to operate
this unit.
Note:
The remote control unit is not provided for this unit.
C AC power cord
After all other connections are complete, connect the plug to the
AC wall socket.
<
Be sure to connect the power cord to an AC outlet which
supplies the correct voltage.
<
Hold the power plug when plugging or unplugging the power
cord.
A LINE OUT jacks
These jacks transmit an analog 2-channel audio signal. Connect
these jacks to the TUNER jacks of the amplifier (A-R650) with a
stereo RCA pin cable.
Make sure to connect the cable as follows:
white plug
q
white jack (L: left channel)
red plug
q
red jack (R: right channel)
<
Be sure to insert each plug securely. To prevent hum and noise,
avoid bundling the signal interconnection cables together with
the AC power cord or speaker cables.
White (L)
Red (R)
White (L)
Red (R)
CAUTION:
<
Switch off the power to all equipment before
making connections.
<
Read the instructions of each component you
intend to use with this unit.
Summary of Contents for T-R650
Page 111: ...111 ...
