45
ENGLISH
If you press ENTER, you will see the following message:
The copying will be resumed after approx. 30 seconds.
If the Pico-4 does not detect any potential problems with the discs
it will write the TOC information onto the slave CDs. The screen
contains the following message during this process:
5.
After this the copying is started. The percentage which has been
written is shown on the display, along with an animated display to
indicate that writing is currently in progress:
This operation may take a minute or more, depending on the com-
plexity of the disc.
6.
When the finalization operation is complete, the display will show:
The trays are opened automatically. You can now remove the discs
using the eject buttons on the drives (these are disabled while the
copy process is taking place). Alternatively, you can compare the
original with the copy (see:
3.4. „Compare CD-ROM“
).
If one or more of the CD-RW(s) is/are skipped, the corresponding
drive N is shown with this message:
Copy complete, Err at
Copy complete, Err at
Copy complete, Err at
Copy complete, Err at
Copy complete, Err at
[N]
[N]
[N]
[N]
[N]
.
Erasing
Erasing
Erasing
Erasing
Erasing
CD-RW disk
CD-RW disk
CD-RW disk
CD-RW disk
CD-RW disk
Writing
Writing
Writing
Writing
Writing
TOC
TOC
TOC
TOC
TOC
Writing
Writing
Writing
Writing
Writing
7%
7%
7%
7%
7%
Copy
Copy
Copy
Copy
Copy
Complete
Complete
Complete
Complete
Complete
3. Modes
