Teac Pico-4, User Manual

Page: 16 / 34

44
ENGLISH
1. Press the MODE key until the display appears as below (the 8x
may also read 4x or 2x, and indicates the speed at which the copy
will be made – see
3.6 „Setting the Writing Speed“ below).
2. Press the ENTER key.
3. Place the source disc in the MASTER disc tray, and a blank CD-R
respectively CD-RW disc in the SLAVE disc tray. If you decide that
you do not want to make a copy at this stage, press the MODE key
to return to the mode selection menu.
4. Press ENTER to start the copy operation. If the trays are not closed
the error message „
Error, ## TRAY Open ## Error, ## TRAY Open ##
Error, ## TRAY Open ## Error, ## TRAY Open ##
Error, ## TRAY Open ##
“ is shown. Close
the trays and continue by pressing the keys MODE or ENTER.
Start the copying process again. The Pico-4 will read the master
CD and it checks the CD-Rs respectively the CD-RWs inserted in
the slave drives (Checking Media, Cheching Data).
If a CD-RW is inserted into one of the slave drives to which was
written before the following message appears:
N is the number of the corresponding slave drive 1 to 4.
If you will not overwrite the CD-RW you have to cancel the copy-
ing process for this CD-RW with the MODE key.
Copy : 8X Copy : 8X Copy : 8X Copy : 8X Copy : 8X
Ready ? Ready ?
Ready ? Ready ? Ready ?
Mode select Mode select
Mode select Mode select
Mode select
1 Copy : 8X 1 Copy : 8X 1 Copy : 8X 1 Copy : 8X 1 Copy : 8X
3. Modes
CD-RW in driveN CD-RW in driveN
CD-RW in driveN CD-RW in driveN CD-RW in driveN
Erase disk? Erase disk?
Erase disk? Erase disk? Erase disk?