22
Bluetooth® wireless technology
Bluetooth® notes
When using this unit with a mobile phone or other Bluetooth
devices, they should be no more than about 10 m (33 ft) apart.
Depending on the circumstances of use, however, the effective
transmission distance might be shorter.
Wireless communication with every device that supports Bluetooth
wireless technology is not guaranteed.
To determine the compatibility between this unit and another
device that supports Bluetooth wireless technology, refer to that
device's operation manual or contact the shop where you pur-
chased it.
Profiles
This unit supports the following Bluetooth profiles.
o
A2DP (Advanced Audio Distribution Profile)
o
AVRCP (Audio/Video Remote Control Profile)
In order to transfer audio using Bluetooth wireless transmission, the
Bluetooth device must support A2DP.
In order to control playback on the Bluetooth device, it must sup-
port AVRCP.
Even if a Bluetooth device supports the same profiles, though, its
functions might differ according to its specifications.
Codecs
This unit supports the following codecs. It will automatically select
one of them during audio transfer.
o
SBC
o
AAC
o
aptX
The unit will select the appropriate codec to use according to the
codec compatibility of the other Bluetooth device and communica-
tion conditions.
NOTE
You cannot select the codec to be used by pressing a button, for
example.
Due to characteristics of Bluetooth wireless technology, playback
from a Bluetooth device will be slightly delayed compared to play-
back from this unit.
Content protection
This unit supports SCMS-T as a form of content protection when
transmitting audio, so it can play protected audio.
Transmission security
This unit supports security functions during Bluetooth wireless
transmission in accordance with the Bluetooth standard specifica-
tions, but it does not guarantee the privacy of such transmissions.
TEAC CORPORATION will bear no responsibility should an informa-
tion leak occur during Bluetooth wireless transmission.
Pairing with another Bluetooth device
Pairing this unit with another Bluetooth device is necessary the first
time you connect with that Bluetooth device.
1
Turn the INPUT SELECTOR knob to select Bluetooth.
Bluetooth
SELECT DEVICE?
o
If no paired device is available, “NO PAIRED DEVICE” will
appear.
2
Enable Bluetooth transmission on the other
Bluetooth device.
3
Press and hold the INPUT SELECTOR knob to enter
pairing mode.
Bluetooth
PAIRING
o
“PAIRING” blinks when pairing.
4
On the other Bluetooth device, select “NT-503” (this
unit).
After this unit enters pairing mode, pair with it from the other
Bluetooth device.
For details, refer to the operation manual of that Bluetooth
device.
After connection, the display will show the input source.
o
If a request for a passcode appears on the screen of the
Bluetooth device, enter “0000” (four zeros).
Summary of Contents for NT-503DAB
Page 99: ...99...
