Timer recording using G-CODE
◆
For timer recordings, clock, date, and stations
must be set correctly.
◆
Load a cassette with its safety tab in place
(see page 13) and with sufficient free space for
the recording.
◆
If you don’t have the
G-CODE numbers
see page 10 for the normal timer.
◆
If you have made a
mistake
, move back to the relevant position with the
button and
change the setting.
◆
If there is
no programme location
displayed under “PR” in the change menu, the video
doesn’t yet know the location number for the programme you want. Type it in and this will be
stored for last recordings.
◆
Should programming
overlap
, you get a warning.
◆
To cancel the recording press the button (stop) more than 5 seconds.
◆
G-CODE is a trademark applied for by Gemstar Development Corp.. The G-CODE system is
manufactured under license from Gemstar Development Corporation.
Call the G-Code menu.
From your TV magazine, type in the number next
to the programme you want to record ...
... and confirm.
Decide if you want to record "Once", "Weekly" or
"Daily"...
... and confirm.
Switch your video off.
If you wish to make changes:
Move to the position you want to change using the
/
buttons.
Change the setting using the
/
or number buttons. If all
setting are ok, press ok, till you see “OK: confirm” in the
bottom line.
Confirm.
9
G-CODE
G-Code
0-9:G-Code Number
:correct
OK:confirm MENU:end
G-Code Number
83077----
How often do you want
to record this program?
PR+/-:select
OK:confirm MENU:end
TIMER PROGRAM (Once)
PR
03
Start Time
21:20
End Time
22:20
Start Date
15/08(TUE)
Tape Speed SP
TMR
/
:correct
OK:confirm MENU:end
Once
Weekly(Once a Week)
Daily(Mon-Fri)
Daily(Mon-Sat)
Daily(Mon-Sun)
R E C O R D I N G
c a s s e t t e s
1
2
3
4
5
6
7
8
9
0
OPERATE
DVSK471DX-HB/H_(GB) 00.11.17 4:0 PM ˘
`
9