Switching power on/off: Save energy
Whether you are using mains or battery supply, to
avoid unnecessary energy consumption always
adjust the source selector to off.
General operation
1
To select your sound source adjust the source
selector to
MP3.CD/ OFF /AM/FM
.
2
Adjust the sound with the
VOLUME
controls.
RADIO
Radio reception
– For
FM
, pull out the wired antenna. Incline and
turn the antenna. Reduce its length if the signal is
too strong (very close to a transmitter).
– For
AM
the set is provided with a built-in antenna
so the telescopic antenna is not needed. Direct the
antenna by turning the whole set.
3
To switch off the set, adjust the source selector to
off position.
1. Slide the FUNCTION selector to a desired setting
- FM, AM.
2. Rotate the TUNING control to find the desired
stations.
3. When you have finished listening, slide the
FUNCTION selector to the OFF position to shut
the power off.
BASIC FUNCTIONS
RADIO
EN-
7
EN-
8
NOTE: If the FUNCTION selector is set to the FM
position and you have tuned to an FM
stereo station, the FM stereo LCD indicator
will light.
CD/MP3 Player
Playing a CD/MP3
This CD-player can play Audio Discs, CD-R, and
CD Rewritables. Do not try to play CD-ROM, CDi, VCD,
DVD or computer CD.
1
Adjust the source selector to CD.
Display: shows - - - Briefly.
2
To open the CD door, lift the CD door at the edge
marked
OPEN/CLOSE.
3
Insert a CD, CD-R or CD-RW with the printed side
Facing up and press the CD door gently close.
4
Press on the set to start playback.
5
To pause playback press
To resume, press
again.
6
To stop CD playback, press
.
Note: CD play will also stop when:
– you open the CD compartment;
– you select RADIO sound source;
– the CD has reached to the end.
Selecting a different track
During playback you can use
or
to select a
particular track.
•If you have selected a track number in the stop or
pause position, press
“PLAY/PAUSE”
to start playback.
•Press
once briefly for the next track, or press
repeatedly until the desired track number appears
in the display.
•Press
once briefly to return to the beginning of
a current track.
•Press
more than once briefly for a previous
track.
Different play modes: Repeat
REPEAT
– plays the current track continuously
REPEAT ALL
–plays the entire CD continuously
Programming track numbers
You may store up to 32 tracks in the desired
sequence. If you like, store any track more than once.
1
In the
PROG
mode, press
or
for your desired
track.
2
When your chosen track number appears, press
PROGRAM
once to store the track.
The display shows
prog
and prog briefly
followed by your selected track number.
3
Repeat steps 1 to 2 to select and store all desired
tracks in this way.
4
To play your program, press
Reviewing your set program
•
Erasing a program
You can erase the contents of the memory by:
– opening the CD door;
– selecting
RADIO
source;
– In STOP mode, press PROGRAM and then
press STOP
CD/MP3 PLAYER
Notice for CDR/CDRW MP3 users:
Depending on the type of CD burner, on the
disc brand, the burning speed and the MP3
compression level, some reading problems
may occur.
After playing at least one programmed track.
Press or ,the display will show your
stored track numbers.
