11
18
8
10
10
12
6
PROGRAM
REPEAT
INTRO
REMOTE CONTROL SYSTEMS
STOP
EN-
5
EN-
6
English
POWER SUPPLY
Top and front panels (See
)
Power Supply
Using AC Power
1 Check if the power voltage, as shown on the type
plate located at the rear of the set, corresponds
to your local AC power supply. If it does not,
consult your dealer or service centre.
2 Connect the power cord to the AC MAINS inlet and
the wall outlet. The power supply is now
connected and ready for use.
3 To switch off completely, unplug the power cord
from the wall outlet.
•Unplug the power cord from the wall outlet to
protect your set during heavy thunderstorms.
1
Back Panel (See )
1
1. FUNCTION SELECTOR
- selects source of sound CD, OFF or AM,FM,
also the power off switch.
2.REMOTE CONTROL SENSORE
- receive the signal from the remote control.
3. CD DOOR
- Press here to open / close the CD door.
4. DISPLAY
- shows the CD functions.
5. DIAL POINTER WINDOW
- shows the AM/FM dial frequency.
6.
PROGRAM
CD : - programs and reviews programmed
track numbers.
7.
FM STEREO INDICATOR
- shows the FM stereo indication.
8. REPEAT
- repeats a track / CD / program.
9. STEREO HEADPHONE JACK
- 3.5mm stereo headphone jack.
10. SKIP
/ , /
CD: - skips track backwards or forward.
11. STOP
- stops CD playback; erases a CD program.
12.
PRESS TO PLAY/PAUSE
- starts or pauses CD play.
13. TUNING CONTROL
- selects FM/AM stations.
14. VOLUME
- adjusts volume level.
18. INTRO
- continuous plays every CD tracks 10 seconds.
15. SPEAKER L/R SOCKET
- for insert speaker L/R jack.
16.FM ANTENNA
- to improve FM reception.
17. AC MAINS
- inlet for power cord
CONTROLS
1
• If the electric cable is damaged, it must be
replaced by the manufacturer, or by the
qualification persons, in order to avoid a danger.
1 2 3 4 5 6 7 8
9
10
11 12 13 14
17
15
16
