14
Listening to Radio Programs
3
1
2
A
Press the TUNER (BAND) button.
1
To select the band (MW or FM), press the TUNER (BAND) but-
ton again.
2
Select a station.
3
Hold down the TUNING button (
or
) for a while and
release the button. When a station is tuned in, the tuning stops
automatically.
Repeat this step until the desired station is found.
Press the TUNING button to stop the tuning.
<
To select stations which cannot be tuned automatically, press
the TUNING button repeatedly.
<
"STEREO" is displayed when a stereo broadcast is tuned in.
If the reception is poor
A
Press the FM MODE button.
The unit is turned to mono mode, but the reception will
improve.
For a good reception, turn around the antenna so that you can
get the stations clearly.
Storing Preset Stations
2
1
2 3
3
A
3
Up to 20 FM and 12 MW stations can be stored in preset memo-
ries.
Press the TUNER [BAND] button to select FM or MW.
1
Press the TUNING button and tune in a station to be stored as
a preset station and then press the MEMORY/TIME SET button.
2
Select a preset channel to store the station by pressing the
REPEAT/PRESET UP button or a numeric button, and then press
the MEMORY/TIME SET button.
3
Remember not to overwrite a preset channel. It is wise of you
to write down which stations are stored in which channels.
To store more stations, repeat steps
to
.
How to select preset stations
A
3
1
Press the PRESET UP button or numeric buttons to select a
preset channel.
