Teac LP-P1000, Owner'S Manual

Page: 22 / 116

22
Using the remote control
Precautions for use
o
When using the remote control, point it toward the
remote control signal receiver on the main unit from
a distance of 5 m (16 ft) or less. Do not place obstruc-
tions between the main unit and the remote control.
o
The remote control might not work if the remote
control signal receiver on the main unit is exposed to
sunlight or bright lights. In this case, try moving the
main unit.
o
Beware that use of this remote control could cause
the unintentional operation of other devices that can
be controlled by infrared rays.
Installing batteries
Remove the cover from the back of the remote control.
Insert two AA batteries into the compartment accord-
ing to the +/− indications. Then, close the cover.
When to replace batteries
If the distance required between the remote and main
unit decreases or if the unit stops responding to the
remote buttons, replace both batteries with new ones.
Dispose of the used batteries according to the instruc-
tions on them or requirements set by your local
municipality.
V
CAUTION
Misuse of batteries could cause them to rupture or
leak, which might result in fire, injury or the stain-
ing of nearby materials. Please read and observe
the precautions on page 3 carefully.