Teac LEV32A121, User Manual

Page: 7 / 48

3
Safety Information
To ensure reliable and safe operation of this equipment, please read carefully all the
instructions in this user guide, especially the safety information below.
Electrical safety
•
The TV set should only be connected to a main power supply with voltage that
matches the label at the rear of the product.
•
To prevent overload, do not share the same power supply socket with too many
other electronic components.
•
Do not place any connecting wires where they may be stepped on or tripped
over.
•
Do not place heavy items on them, which may damage the leads.
• Hold the main plug, not the wi
res, when removing from a socket.
•
During a thunderstorm or when not using the television for long periods, turn off
the power switch on the back of the television.
•
Do not allow water or moisture to enter the TV or power adapter. Do not use in
wet, moist areas, such as bathrooms, steamy kitchens or near swimming pools.
•
Pull the plug out immediately, and seek professional help if the main plug or
cable is damaged, liquid has spilt onto the set, if accidentally exposed to water
or moisture, if anything accidentally penetrates the ventilation slots or if the set
does not work normally.
•
Do not remove the safety covers. There are no user serviceable parts inside.
Trying to service the unit yourself is dangerous and may invalidate the product’s
warranty.
Only qualified personnel should service this apparatus.
•
To avoid battery leakage, remove exhausted batteries from the remote control, or
when not using for a long period.
•
Do not break open or throw exhausted batteries in a fire.
Physical safety
•
Do not block ventilation slots in the back cover. You may place the TV in a
cabinet, but ensure at least 5 cm (2”) clearance all around.
•
Do not tap or shake the TV screen, this may damage the internal circuits. Take
good care of the remote control.
•
To clean the TV use a soft dry cloth. Do not use solvents or petroleum based
fluids.
•
Do not install near any heat sources such as radiators, heat registers, stoves or
other apparatus (including amplifiers) that produce heat.
•
Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding type
plug has two blades and a third grounding prong, the wide blade, or the third
prong is provided for your safety. If the provided plug does not fit into your
outlet, consult an electrician for replacement of the obsolete outlet.
•
Protect the power cord from being walked on or pinched particularly at plugs.
• Unplug the appa
ratus during lightning storms or when unused for long periods.
•
Refer all servicing to a qualified service personnel. Servicing is required when
the apparatus has been damaged in any way, such as power-supply cord or plug
is damaged, liquid has been spilled, or objects have fallen into the apparatus,
has been exposed to rain or moisture, does not operate normally, or has been
dropped.