43
TV SETUP:
To be able to go through TV menu functions, you can use this item.
The digital TV setup menu screen is accessed from the main menu. Press the
M
key
to display the main menu and use the key to highlight TV Setup, press
SE-
LECT
key to display TV Setup menu screen.
HINT
Depending on the reception conditions
in your particular area,
you may find that the list of channels
found includes one or more repeated
names. This is because the IDTV may
detect and store some channels, in-
cluding those it cannot receive
clearly, from adjacent areas alongside
the strong channels from a transmitter
nearby. This is not a problem and the
weaker channels can be deleted from
the IDTV later.
If no digital terrestrial television
broadcasts are found the IDTV will
display a message:
Press
SELECT
key to install chan-
nels. If no channel is found,you
should then refer to the Troubleshoot-
er Guide to establish the cause of the
problem.
When you have finished watching digital terrestrial TV, you may wish to switch the
IDTV to standby to save power - even when the television is turned off, without
harm to the television or itself. The IDTV is returned to standby by pressing the
[POWER] key on the remote control handset.
Hint
In standby, the TV still consumes pow-
er and thereby contributes to air and
water pollution and the exhaustion of
the World's natural resources. Over-
night, or when your IDTV is not going
to be used for long periods of time,
you can turn it off at the mains and this
will save energy (and save you money).
You will not have to re-install the IDTV
when it is turned on again.
TEAC_22inch_IDTV_draft.p65
22.10.2004, 14:35
43