Recording
During watch the live broadcast, select a point on the progress bar which you want by the
pointer. You can also press the Left/Right buttons on your remote control to use this feature.
Select a previous point than the current point on the progress bar
Enjoy Live TV
The Live Playback function can be used only for broadcast programmes you view through
the antenna input terminal. However, you cannot use this option while listening to a radio
programme.
Select a device to be used with Live Playback when two or more USB HDDs are connected
to the TV.
You cannot use a USB stick. Connect a USB HDD with 80 GB or more of total storage.
If there is not enough remaining space in the USB HDD device, Live Playback may not work
properly. To use Live Playback function, you need the USB HDD which has at least 2.3 GB.
With the Live Playback function, you can play a programme back for up to two hours
depending on remaining USB HDD capacity. This time may vary depending on your region.
The videos saved in Live Playback mode are deleted if you turn off the TV without
recording them.
Changing between programmes during Live Playback will delete the data of the previous
programme.
Some models may not be supported.
Using the Recording Functions
With the webOS TV, you can use recording functions.
Using Instant Recording
1.Connect a USB HDD or USB stick to a USB port.
2.It is recommended that you record to a USB HDD.
3.During watch the Live broadcast, press the Wheel (OK) button.
4.Press the Start Recording button at the bottom of the screen.
If you want stop the recording, press the Stop Recording button