Please read and understand all the following warnings and those marked on the unit.
This unit has been designed and manufactured to assure personal safety.
Connect only to appropriate main
power as indicated on the unit or
User Manual.
Keep the unit and power plug
away from water.
Avoid direct sunshine and
heat source.
Never open the cover, avoid
dropping metal objects into the unit,
such as needle, hairpin, coin etc.
Protect power cable: avoid stress
and keep out of walk ways; do not
pull & bend excessively.
Unplug the set from the outlet
when you do not use it for a long
time.
WARNING
2
11
1. Enter FM Function
While in operating mode, press the
button on the remote control to enter FM
mode.
2. Select Bands
1) Directly input frequency: press the
button on the remote control, then input the
frequency that you want. The range of FM frequency is from 88.00MHz to 108.00
MHz.
2) Select the band by pressing
or
button: press this button to adjust the
frequency up or down a step. The step of FM is 0.05 MHz.
3) Select saved stations by pressing number buttons. For example: press
button
twice,
button once, you may select the 25th saved station. Press the
or
button to switch to the previous or next band.
4) Automatically search bands: press the
button, this system starts to
search bands from low to high frequency automatically. The searched band are
saved automatically. Press this button again to stop searching.
3. Save Bands
Press the
button to save the current frequency. For example: if you want to
save 99.3 MHz in 28th memory cell, press
button twice and
button once, press
button to input 9 9 3, then press
button.
Note: ``
`` (on the unit`s display screen) means Saving band.
4. Soundtrack Selection
To select Mono or Stereo while in FM mode, press
button. When you select
stereo, the display shows a stereo signal. If the signal is not strong enough, you
cannot select Stereo.
Note: ``
`` (on the unit`s display screen) means Stereo.
5. Exit FM Mode
1) Press the
button on the remote control to exit FM status, and switch to
USB/CARD mode.
2) Press the
button on the remote control to exit FM status, and switch to the
IPOD mode.
3) Press the
button on the remote control to exit FM status, and switch to
Audio input mode.
(Please vary the antenna direction to find the strongest signal for each station.)
FM
T/F
TU-
TU+
10+
5
CH-
CH+
SEARCH
SAVE
10+
8
T/F
SAVE
MO/ST
USB/SD
IPOD
AUDIO
RADIO OPERATION
Summary of Contents for iTB400 i-TALLBOY
Page 1: ...iTB400 i TALLBOY ...
Page 2: ......
