Teac Esoteric K-05, Owner'S Manual

Page: 31 / 36

31
Specifications
Compatible disc types (playback)
Super Audio CD, CD (including CD-R and CD-RW )
Analog audio outputs
Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . XLR connector (2ch) × 1
RCA connector (2ch) × 1
Output impedance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . XLR: 100 Ω
RCA: 25 Ω
Maximum output level (1 kHz, full-scale, into 10 kΩ)
XLR (set to 0 dB): 2.45 Vrms
RCA: 2.45 Vrms
Frequency response . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Hz to 55 kHz (-3 dB)
S/N ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115 dB
Total harmonic distortion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.0015 % (1 kHz)
Digital audio output
RCA connector ×1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.5 Vp-p (into 75 Ω)
Optical digital connector ×1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -15 to -21 dBm
Digital audio input
RCA connector × 1 (input impedance 75 Ω) . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.5 Vp-p
Optical digital connector ×1 . . . . . . . . . . . . . . . . . . . . . . . . . . . -24.0 to -14.5 dBm peak
USB-B connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . USB2.0 standard
Clock sync input format
Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . BNC
Supported input frequencies
CD/SACD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44.1, 88.2, 176.4 kHz,
10/22.5792 MHz
USB (HS_2) input. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44.1, 48, 88.2, 96, 176.4, 192 kHz
10, 22.5792, 24.576 MHz
(±15 ppm)
Input impedance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75 Ω
Input level . . . . . . . . . . . . . . . . . . . . . . . . . . . Rectangle wave: equivalent to TTL levels
Sine wave: 0.5 to 1.0 Vrms (50 to 75 Ω)
General
Power supply
Europe/Hong Kong model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AC 230 V, 50 Hz
U.S.A./Canada model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AC 120 V, 60 Hz
Korea model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AC 220 V, 60 Hz
Power consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13 W
External dimensions (W x H x D)
445 x 131 x 358 mm (17 1/2" x 5 1/8" x 14 1/8")
(including protrusions)
Weight. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 kg (30 7/8 lb)
Operating temperature range. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .+5°C to +35°C
Operating humidity range . . . . . . . . . . . . . . . . . . . . . .5 % to 85 % (no condensation)
Storage temperature range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -20°C to +55°C
Included accessories
Power cord × 1
Remote control (RC-1251) × 1
Batteries for remote control (AA) × 2
Owner’s manual (this document) × 1
Warranty card × 1
Design and specifications are subject to change without notice.
Illustrations in this manual might differ slightly from production
models.
Restoring factory default settings
Setting changes are retained even when the power cord is
disconnected.
Follow these procedures to make the unit forget setting changes
and restore all settings to their factory defaults.
1. Turn the power off.
If the unit is on, press the POWER button to turn it off and wait
for more than 30 seconds.
2. Press the POWER button while holding down the STOP
button on the main unit.
Release the STOP button when “Setup CLR” appears on the
display.