19
Playback Operation
PLEASE READ THE FOLLOWING INSTRUCTIONS CAREFULLY BEFORE USING
YOUR UNIT FOR THE FIRST TIME.
WARNING: Do not play poor quality discs to avoid damaging the lens.
Preparation
1.
Connect the unit to power supply through the provided adaptor.
2.
Switch POWER ON/OFF to ON to turn on the unit.
3.
Push the OPEN switch to open the disc tray cover. Put a disc in the disc tray with
printed side up. Then close the disc cover. See the figures below.
4.
The unit will search disc and enter the disc searching status.
5.
Adjust the volume with the VOLUME control to desired level.
6.
To turn the unit off, switch the POWER ON/OFF to OFF.
Basic Operation
MODE Button
Press the MODE button and then press the
button on the panel to adjust
brightness or color of the screen; press the MODE button and hold it for several
seconds to change the aspect ratio of the screen among 16:9, and 4:3.
See the figures
below for details:
DVD Playback
Region Code DVD players and discs are coded by region. These regional codes must
match with the played discs. If the codes don’t match, the disc cannot be played. This
player’s default code is region 4.
