Teac DVD Dupli 14/4 Page 14 User Manual Download

Page: 14 / 66

ENGLISH

Important
During operation do not press any button on your
CopyStation, because interruption will harm the device, and
DVDs/CDs will be damaged.

3.2.2 Copying Without a HDD

If your CopyStation is not equipped with the optional hard disk, the
operation procedures will be as follows:

Place a source DVD/CD into the source drive.

Switch to function 1 Copy by pressing

. Place blank DVDs/CDs

into the writers, and press ENT to start copying.

When copying comes to an end, the passed DVDs/CDs will eject
automatically.

The failed DVDs/CDs will remain in the writers. The default is keep-
ing failed DVDs/CDs in the writers, but you can change it. To take the
failed DVDs/CDs you need to press the “eject” buttons on the writ-
ers.

Important
During operation do not press any button on your
CopyStation, because interruption will harm the device, and
DVDs/CDs will be damaged.

3. Basic Instructions

Summary of Contents for DVD Dupli 14/4



































































Search results

Summary of Contents for DVD Dupli 14/4

Reviews:

Related manuals for DVD Dupli 14/4

Brands by name

Popular brands

Teac DVD Dupli 14/4, User Manual

Search results

Summary of Contents for DVD Dupli 14/4

Reviews:

Related manuals for DVD Dupli 14/4

Brands by name

Popular brands