- 17 -
DV-B800
- 16 -
DV-B800
High Definition Digital Terrestrial Receiver
High Definition Digital Terrestrial Receiver
Setting up Your System
Basic Function
Information Screen
After the television channels have been programmed, you will see the information(banner)
box each time you switch channels.
Logical Channel Number
Channel Name
Network Name
Parental Rating
Signal Quality
Now & Next Information
“Dolby D avialable”
appears when
selection is possible
Category
Day / Time
Indicator
Setting up Your System
Channel (Service) Change
1. Press the numeric buttons (0~9) on the remote control to select the channel no.
you want.
2. Press the OK button on the Remote Control Unit and select the channel you want from
the Channel List.
3. Press the CH+/CH- buttons on the Remote Control Unit to select the channel you want.
Sound
available
Subtitle
available
Teletext
available
Signal Quality
Banner 1
Banner 2
Dolby D available
VIDEO FORMAT
You can select Video Format by pressing the “FORMAT” button.
When you press button the format will change by the turn 1080i
720p
576p
576i(PAL).
VIDEO OUTPUT(See table on page 39)
You may select one of the various Video Outputs by pressing the button “OUTPUT”.
Video Outs will chage by the turn. Component
D/SUB
DVI.
S-VHS, CVBS(Composite Video) will be availale with all modes except 720p mode.
Note : 1. S-VHS & CVBS(Video) output format
will not change regardless of the
selection.
2. OSD in 720p, 576p formats will not be
displayed through S-VHS & CVBS outs.
(OSD displayed only in 576i, 1080i
formats)
If You select,
Component(It is default setting):
YPbPr
YPbPr
D-SUB
No out
DVI
No out
D/SUB:
YPbPr
No Out
D-SUB
activated
DVI
No out
DVI:
YPbPr
RGB
D-SUB
No out
DVI
activated