- 11 -
DV-B800
- 10 -
DV-B800
High Definition Digital Terrestrial Receiver
High Definition Digital Terrestrial Receiver
5
10
Connecting Your Equipment
Connecting Your Equipment
Front Panel
ANT IN
To connect the antenna here.
LOOP THROUGH
Used to connect a RF signal from the STB to either the RF input jack
(antenna) on your VCR or to the antenna input of your TV.
S-VHS
To connect to S-VHS (S-Video) input of the display device. Note that
no on screen display may be available on this output when either 576p
or 720p is selected.
YPbPr
The 3 coloured RCA (Cinch) connectors are switchable between
Component and RGB mode. Press the OUTPUT key on the remote
controller. The letters ‘ypb’ will momentarily appear on the front
display when component video mode is selected.
VIDEO & AUDIO L/R
To connect Video(CVBS) & Audio L/R to a TV, Audio Amp or Hi-Fi
system.
D-SUB
To connect to a PC monitor. Press the OUTPUT key so the letters
‘dsub’ momentarily appear on the front display when using this feature.
DVI
To connect to the digital video input on your Plasma, LCD or computer
monitor display. Press the OUTPUT key to select RGB mode for this
feature.
USB
To upgrade software using USB memory.
OPTICAL
To connect S/PDIF cable for digital audio(Dolby Digital streaming out).
RS232
To connect to a personal computer for software upgrade.
Rear Panel
1 2
4
POWER
To Switch between Operation and Standby mode.
IR SENSOR
Point remote controller toward front on the DV-B800
REMOTE LED
Remote operating
STANDBY/ON
RED LED indicates STAND-BY condition
GREEN LED indicates Operating
CHANNEL-
To change channels down. To move down highlight marked cursor.
To change channels up. To move up highlight marked cursor.
Volume up
To volume up the sound.
Volume down
To down the sound volume.
4
5
1
6 7
8
2
3
4
1
2
5
1
2
3
4
5
6
7
8
9
10
6
7
8
3
6
7
8
9
2
3