Teac DR-2d, Owner'S Manual

Page: 75 / 88

TASCAM DR-2d
75
System Settings and Formatting
From the Setup Screen, you can change various settings
to optimize the device for your use environment and other
requirements. You can also initialize the unit and format the SD
card.
To open the Setup Screen, press the MENU key. Select
SETUP
from the Menu Screen and press the
ENTER/MARK
key.
The following settings can be made for the items on the Setup
Screen.
Use the
Â
and
¯
keys and the wheel to set each item.
Setting the search speed
Use the
CUE/REV SPEED
item to set the speed of forward and
backward searching when pressing and holding the  and
¯
keys.
Options:
x2
,
x4
,
x8
(factory setting),
x10
Turning the unit power OFF automatically
Use the
AUTO OFF
item to set the time before the unit power
automatically turns OFF after the last activity or use when
powered by the battery.
Options:
OFF
(factory setting—the unit does not automatically
turn OFF),
3 min
,
5 min
,
10 min
,
30 min
Backlight Auto OFF setting
Use
BACKLIGHT
to set the time until the backlight
automatically turns OFF after the last operation when powered
by the internal battery.
Options:
OFF
(backlight always on),
5 sec
(factory setting),
10
sec
,
15 sec
,
30 sec
Adjust the display contrast
Use
CONTRAST
to adjust the display contrast.
Options:
1
–
20
(factory setting:
8
)
Adjust the backlight brightness
Use
DIMMER
to adjust the backlight brightness.
Options:
HIGH
(factory setting),
LOW
,
OFF
(no backlight)
10–Settings and Information