Teac DPF100, User Manual

Page: 7 / 15

6
Important Safeguards
grounding of the lead-in wire to an antenna
discharge unit, size of grounding conductors,
location of antennadischarge unit, connection
to grounding electrodes, and requirements
for the grounding electrode. See figure below.
•
•
LIGHTNING. For added protection for this
product during a lightning storm, or when it is
left unattended and unused for long periods of
time, unplug it from the wall outlet and disconnect
the antenna or cable system. This will prevent
damage to the product due to lightning and power
lines surges.
POWER LINES. An outside antenna system should not be located in the vicinity of overhead power
lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When
installing an outside antenna system, extreme care should be taken to keep from touching such power
lines or circuits as contact with them might be fatal.
• NON-USE. Unplug the power from the outlet when the unit is not in use.
• AVOIDING SURGES. For added protection during a lightning storm, unplug the Digital Picture Frame
from the wall outlet to prevent damage to the product due to power line surges.
• OVERLOADING. Do not overload wall out lets or extension cords.
• OBJECT AND LIQUID ENTRY. The apparatus shall not be exposed to dripping or Splashing and that
no objects filled with liquids, such as Vases, shall be placed the apparatus.
• DAMAGE REQUIRING SERVICE. Seek service by qualified service personnel when:
- The power supply has been damaged.
- Liquid has been spilled onto the Digital Picture Frame.
- The unit has been exposed to rain.
- The unit does not operate normally, or exhibits a marked change in performance.
- The unit has been dropped or physically damaged.
•
•
•
• SERVICING. Do not attempt to service the Digital Picture Frame beyond those means described in
these operating instructions. All other servicing should be referred to qualified service personnel.
REPLACEMENT PARTS. When replacement parts are required, be sure the service technician has
used replacement parts specified by the manufacturer or have the same characteristics as the original
part. Unauthorized substitutions may result in fire, electric shock, or other hazards.
SAFETY CHECK. Upon completion of any service or repairs to this product, ask the service
technician to perform safety checks to determine that the product is in proper operating condition.
WALL OR CEILING MOUNTING. The product should be mounted to a wall or ceiling only as
recommended by the manufacturer.
CAUTION--
To reduce the risk of personal injury or product/property damage:
• CLEANING. Clean the outer surface of the Digital Picture Frame (excluding the screen) gently
using a soft cloth dampened with water. Clean the screen only with a specified cleaning solution
for use with products such as laptops and computer monitors. These are available at most retail
consumer electronics stores. Do not clean the inside of the unit.
23