Teac CR-H700DAB, Owner'S Manual

Page: 5 / 320

ENGLISH
5
Playable Discs:
M
Conventional audio CDs bearing the COMPACT DISC
DIGITAL AUDIO logo on the label.
M
Properly finalized CD-R and CD-RW discs
M
MP3/WMA CDs
Note:
<
Depending on the quality of the disc and/or the
condition of the recording, some CD-R/CD-RW discs
may not be playable.
<
Copy-protected discs and other discs which do
not conform to the CD standard may not play back
correctly in this player. If you use such discs in this
unit, TEAC Corporation and its subsidiaries cannot be
responsible for any consequences or guarantee the
quality of reproduction. If you experience problems
with such non-standard discs, you should contact the
producers of the disc.
<
Always place the disc on the disc tray with the label
side uppermost. (Compact discs can be played or
recorded only on one side.)
<
To remove a disc from its storage case, press down on
the center of the case and lift the disc out, holding it
carefully by the edges.
<
If the disc becomes dirty, wipe the surface radially
from the center hole outward towards the outer edge
with a soft and dry cloth.
<
Never use such chemicals as record sprays, antistatic
sprays or fluid, or thinner to clean the discs. Such
chemicals will do irreparable damage to the disc’s
plastic surface.
<
Discs should be returned to their cases after use to
avoid dust and scratches that could cause the laser
pickup to ”skip”.
<
Do not expose discs to direct sunlight or high
humidity and temperature for extended periods. Long
exposure to high temperatures will warp the disc.
<
Do not play any disc that is warped, deformed or
damaged. Playing such discs may cause irreparable
harm to the playing mechanisms.
<
CD-R and CD-RW discs are more sensitive to the
effects of heat and ultraviolet rays than commercial
CDs. It is important that they are not stored in a
location where direct sunlight will fall on them, and
which is away from sources of heat such as radiators or
heat-generating electrical devices.
<
While printable CD-R and CD-RW discs utilizing
modern printing technologies are generally
acceptable, older systems that use adhesives to
attach paper type labels to the disc surface are not
recommended.
<
Do not stick papers or protective sheets on the discs
and do not use any protective coating spray.
<
Use a soft oil-based felt-tipped pen to write the
information on the label side. Never use a ball-point
or hard-tipped pen, as this may cause damage to the
recorded side.
<
Never use a stabilizer. Using commercially available CD
stabilizers with this unit will damage the mechanisms
and cause them to malfunction.
<
Do not use irregular shape CDs (octagonal, heart
shaped, business card size, etc.). CDs of this sort can
damage the unit.
<
If you are in any doubt as to the care and handling of a
CD-R/CD-RW disc, read the precautions supplied with
the disc, or contact the disc manufacturer directly.
Playable Discs/Files and iPod/iPhone/iPad Compatibility (1)