background image

10.4 Burn-in

14

TEAC 

CDW-D11 

User’s Manual

10.4 Burn-in

This function runs an emulate writer function continuously. The disc in the target 
drive is ejected and re-inserted automatically between each cycle test. This 
function can be prepared to run continuously, or specified to run from 1 to 1000 
times.

10.5 Update Firmware

This function updates the firmware of the interface board via CD disc. The disc 
must contain the required data file and be inserted in the source drive. The CD 
Duplicator finds the data and updates its firmware automatically. During the 
update, do not turn off the power to the machine. The update process is complete 
after the system resets automatically and displays the main menu.

10.6 Compare Firmware

This function compares the current firmware version in the interface board to the 
update version in the disc. 

10.7 H/W Diagnostic

This function detects the devices connected to the interface board and checks for 
functionality. The LCD displays information on the hardware.

10.8 Load Default

This function resets all factory default settings. It is recommend that you reset the 
defaults if the CD Duplicator fails to function properly after you made changes to 
the original configuration.

10.9 CD+G

This function enables or disables CD+G (karaoke CD) format support. The default 
setting is 

OFF

.

10.10 ISRC & MCN

This function enables or disables ISRC and MCN format support. The default 
setting is 

ON

.

10.11 Switch USB Mode

This function is not applicable to the TEAC 1x1 CD Duplicator.

Note: The CD+G value must be set to OFF in order to use the Track Extraction 
features.

Summary of Contents for CDW-D11































Reviews: