Teac CD-W552E, User Manual

Page: 7 / 36

Recommended System Requirements
TEAC CD-RW Drive User’s Manual 1
Chapter 1. Introduction
Thank you for purchasing a TEAC CD-RW drive kit.
The TEAC CD-RW drive can write to CD-R discs at speeds of 4X, 8X, 12X, 16X,
20X, 24X, 32X, 40X, 48X or 52X maximum, and rewrite to CD-RW discs at
speeds of 2X, 4X, 8X, 10X, 12X, 16X or 24X maximum.
The drive can read data from CD-ROM discs and extract digital audio from discs
at a maximum of 52X speed.
CD-R discs enable you to create audio or data discs for permanent archival
storage. They cannot be overwritten.
You can, however, overwrite CD-Rewritable (CD-RW) discs—typically up to
1,000 times.
The TEAC CD-RW Drive is designed for use in IBM PC compatible computers.
It features a 5.25-inch standard chassis and a powered tray for convenient disc
loading.
Recommended System Requirements
❑
IBM PC-compatible computer, Pentium II 300MHz or higher
❑
CD-ROM drive with DAE support for disc-to-disc audio recording
❑
One available 5.25-inch drive bay
❑
64MB of RAM
❑
A hard drive that meets or exceeds the following minimum specifications:
❑
1GB hard disk space (or more) for CD-Image creation
❑
1.2MB/second data transfer rate (or faster)
❑
12ms average access time (or less)
❑
Sufficient hard disk space for software installation (approx. 70MB)
❑
Windows 98SE/Me/2000-Professional/XP Home Edition/XP Professional or
NT 4.0 Workstation
Note: The CD Recording software included in this package will work on
systems on which Windows 2000-Professional has been fully installed. It
will not work on systems on which Windows 2000 has been installed by
upgrading earlier versions of Windows (i.e., Windows 98SE). This software
will not work with Windows 2000 Server, Advanced Server, Datacenter
Server, or Windows NT 4.0 Server.
TEAC52x24x52.book Page 1 Thursday, December 19, 2002 3:29 PM