High Speed Recording Guidelines
12
TEAC CD-RW Drive User’s Manual
The system displays the following screen (Figure 10):
Figure 10. Checking the DMA Box
4.
Check the
DMA
box, then click
OK
.
5.
Repeat Step 4 for your hard disk drive in the
Disk Drives
section.
6.
Close the
System Properties
windows and restart your system.
Windows NT 4.0 Workstation
Windows NT 4.0 requires you to edit the Registry in order to enable the DMA
setting. It is recommended that you follow the instructions from the Microsoft
KnowledgeBase. You can access article number
Q158873: How to Enable IDE
DMA Bus-Mastering Using SP2 Atapi.sys
at
www.microsoft.com
. Enter article
number “Q158873” in the search field.
It is also recommended that you install the latest Service Pack to ensure you have
the latest updates in your system. For information, see article number
Q152734:
How to obtain the latest Windows NT 4.0 Service Pack
at
www.microsoft.com
.
Enter article number “Q152734” in the search field.
Caution:
Using the Registry Editor incorrectly will cause serious problems that
will require you to reinstall Windows NT.
Be very careful and always back up
your files before you make any changes.
TEAC40x12x48.book Page 12 Sunday, March 17, 2002 7:27 PM
